DescriptionThe Engine Actuator ADC225 is a rotary output, liner torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi-voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12, 24, or 32 volt battery supplies.Specificationower Input Operating Voltage 12, 24, or 32 VDC Normal operating Current 1.5 A at 24/32VDC Maximum Current-Continuously Rated 4A at 24V/ 32 VDCPerformance Available Torque Max 2.2 ib-ft (2.7Nm) Maximum operating shaft Augular Travel 25± 1 degree CW/CCWEnvironmental Temperature Range -65 to 200°F(-54° to 95 °C) Relative Humidity Up to 100% All Surface Finishes Fungus Proof and Corrosion ResitantReliability Vibration Up to 20 G 100 50-500 Hz. Testing 100% TestedPhysical Dimensions See Diagram 1 Weigh1 8 lbs.(3.5kg) Mounting Any position, Vertical PreferredMating Hardware Connector ACB 225/ADB 225 EC 1000/ MS3106R 14S-6S (6 pins) Connector ADC 225 Supplied with Actuator Lever ACB 225/ ADB 225/ADC225S LE 1400-2 Lever ADC225 LE 1500-2 Rod End Bearings (to attach a 1/4- 28THD linkage rod to the lever) BR 200(right hand) / BR201 (left hand)Wiring harness ADC225 Supplied with Actuator Wiring harness ACB225/ ADB225 Various Lengths availale
